Follow

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Contact

Problem with wifi drivers ubuntu 20.04 lts on BCM4360 802.11ac [14e4:43a0] (rev 3)

I know there is a lot of threads about this, but I followed a great number of them and none worked.

I installed ubuntu 20.04 on a live usb using rufus for a mackbook pro late 2013. After a while, I noticed the driver is there by default, but : it only works once. Here is how I made it work once : I made the install by clicking the icon on the desktop up to the part where it asks where to make the install -> wifi worked until reboot. An other way was to go on the additional driver panel, disable it, reboot, enable it -> wifi worked until reboot.

I dont know why it is there and doesnt work…

MEDevel.com: Open-source for Healthcare and Education

Collecting and validating open-source software for healthcare, education, enterprise, development, medical imaging, medical records, and digital pathology.

Visit Medevel

Drivers

I also tried the b43 firmware installer, following other threads, but nothing worked.

Suggested commands in ubuntu 20.04.3 lts:

lsmod | grep -e b43 -e wl  
wl                   6455296  0
cfg80211              888832  1 wl

And

grep -e b43 -e wl /etc/modprobe.d/*
/etc/modprobe.d/blacklist-bcm43.conf:# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43legacy
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/iwlwifi.conf:# /etc/modprobe.d/iwlwifi.conf
/etc/modprobe.d/iwlwifi.conf:# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
/etc/modprobe.d/iwlwifi.conf:# microcode file installed on the system.  When removing iwlwifi, first
/etc/modprobe.d/iwlwifi.conf:# remove the iwl?vm module and then iwlwifi.
/etc/modprobe.d/iwlwifi.conf:remove iwlwifi \
/etc/modprobe.d/iwlwifi.conf:(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \

And

    sudo dmesg | grep wl
    [   59.790911] wl: loading out-of-tree module taints kernel.
    [   59.790920] wl: module license 'MIXED/Proprietary' taints kernel.
    [   59.793410] wl: module verification failed: signature and/or required key missing - tainting kernel

And

sudo dmesg | grep -e wl -e bcma
[    1.141227] bcma-pci-bridge 0000:03:00.0: bus0: Found chip with id 0x4360, rev 0x03 and package 0x00
[    1.141271] bcma-pci-bridge 0000:03:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
[    1.141296] bcma-pci-bridge 0000:03:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
[    1.141342] bcma-pci-bridge 0000:03:00.0: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
[    1.141392] bcma-pci-bridge 0000:03:00.0: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
[    1.141417] bcma-pci-bridge 0000:03:00.0: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
[    1.196936] bcma: Unsupported SPROM revision: 11
[    1.197064] bcma-pci-bridge 0000:03:00.0: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[    1.197070] bcma-pci-bridge 0000:03:00.0: bus0: Using fallback SPROM failed (err -2)
[    1.197075] bcma-pci-bridge 0000:03:00.0: bus0: No SPROM available
[    1.200300] bcma-pci-bridge 0000:03:00.0: bus0: Bus registered
[   45.291300] wl: loading out-of-tree module taints kernel.
[   45.291307] wl: module license 'MIXED/Proprietary' taints kernel.
[   45.293675] wl: module verification failed: signature and/or required key missing - tainting kernel

And

journalctl -b | grep bcma
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: Found chip with id 0x4360, rev 0x03 and package 0x00
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
déc 19 19:11:03 ubuntu kernel: bcma: Unsupported SPROM revision: 11
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: Using fallback SPROM failed (err -2)
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: No SPROM available
déc 19 19:11:03 ubuntu kernel: bcma-pci-bridge 0000:03:00.0: bus0: Bus registered

Debug script log : https://pastebin.ubuntu.com/p/ZhR4QRSpDp/

Commands done in 21.10 :

The driver was at first not enabled in the additional drivers window. I enabled it, worked fine until reboot. Then, I tried remove bcma, just in case, but nothing changed.

sudo dmesg | grep bcma
[    1.496684] bcma-pci-bridge 0000:03:00.0: bus0: Found chip with id 0x4360, rev 0x03 and package 0x00
[    1.496731] bcma-pci-bridge 0000:03:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
[    1.496757] bcma-pci-bridge 0000:03:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
[    1.496802] bcma-pci-bridge 0000:03:00.0: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
[    1.496851] bcma-pci-bridge 0000:03:00.0: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
[    1.496876] bcma-pci-bridge 0000:03:00.0: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
[    1.555428] bcma: Unsupported SPROM revision: 11
[    1.555512] bcma-pci-bridge 0000:03:00.0: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[    1.555515] bcma-pci-bridge 0000:03:00.0: bus0: Using fallback SPROM failed (err -2)
[    1.555518] bcma-pci-bridge 0000:03:00.0: bus0: No SPROM available
[    1.559096] bcma-pci-bridge 0000:03:00.0: bus0: Bus registered

>Solution :

How I made it (kinda) work

After a lot of trouble, I think I found a temporary solution.

On Ubuntu 21.10

Step 1 :

On the driver manager -> additional driver -> enable Broadcom 802.11 bcmwl-kernel-source

Works until reboot.

Step 2 (After reboot)

Wifi not working, probably because of drivers conflict.
Disable all drivers:

sudo modprobe -r wl
sudo modprobe -r bcma
sudo modprobe -r b43
sudo modprobe -r brcmsmac

After this, try one by one to enable them :

sudo modprobe wl

This is the one that works for me.

Problem

I have to do this after every reboot, because those changes don’t save. I know there are .conf files with blacklist options, but I don’t know which one to change.

Add a comment

Leave a Reply

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use

Discover more from Dev solutions

Subscribe now to keep reading and get access to the full archive.

Continue reading