Problem while implementing JK-Flip Flop in VHDL

I’m trying to implement JK flip-flop in VHDL, and here is my code:

library ieee;
use ieee.std_logic_1164.all;

entity jk_flip_flop is
port(
    J, K     : in std_logic;
    clk      : in std_logic;
    Q, Q_bar : out std_logic
);
end jk_flip_flop;

architecture behavioral of jk_flip_flop is
begin
   process(J, K, clk)
        variable temp: std_logic;
   begin
        if (clk'event and clk='1') then
             temp:='1' when(J='1' AND K='0') else
                    '0' when(J='0' AND K='1') else
                    NOT temp when(J='1' AND K='1') else
                    temp when(J='0' AND K='0');
              Q <= temp;
              Q_bar <= NOT temp;
         end if;
    end process;
end behavioral;

The error I’m getting from it is:

Error (10500): VHDL syntax error at jk_flip_flop.vhd(18) near text "when";  expecting ";"
Error (10500): VHDL syntax error at jk_flip_flop.vhd(18) near text "else";  expecting ":=", or "<="
Error (10500): VHDL syntax error at jk_flip_flop.vhd(19) near text "else";  expecting ":=", or "<="
Error (10500): VHDL syntax error at jk_flip_flop.vhd(20) near text "else";  expecting ":=", or "<="
Error (10500): VHDL syntax error at jk_flip_flop.vhd(21) near text ";";  expecting ":=", or "<="

What exactly is wrong here? Am I not allowed to use when-else inside a process or is the syntax of when-else statement wrong here?

Also I’m confused whether I need to pass J and K into the process above, or is it enough if I pass only clk, since it should be enough if the new output gets produced at rising edge of the clock pulse.

>Solution :

So your temp := value when ... else ... statement only works outside of a process statement. So you’ve got three options.

Option 1

Upgrade to VHDL 2008, where you can also use this kind of statement in a process.

Option 2

Use a global variable to store the next value… something like:

architecture behavioral of jk_flip_flop is
   signal Q_val: std_logic;
   signal Q_next: std_logic;
begin
   Q_next <= '1' when(J='1' AND K='0') else
             '0' when(J='0' AND K='1') else
             NOT Q_val when(J='1' AND K='1') else
             Q_val;
   Q <= Q_next;
   Q_bar <= not Q_val;

   process(clk)
   begin
        if (clk'event and clk='1') then
             Q_val := Q_next;
         end if;
    end process;
end behavioral;

Option 3

Use ifs instead of when.

architecture behavioral of jk_flip_flop is
begin
   process(J, K, clk)
        variable temp: std_logic;
   begin
        if (clk'event and clk='1') then
             if (J='1' and K='0') then
               temp := '1';
             elsif (J='0' AND K='1') then
               temp := '0';
             elsif (J='1' AND K='1') then
               temp := NOT temp;
             end if;
             Q <= temp;
             Q_bar <= NOT temp;
         end if;
    end process;
end behavioral;

I’m not sure if this will work though… I thought temp would need to be defined at the architecture level for it to have a memory… But I could be wrong about that.

And on the sensitivity list…

Also I’m confused whether I need to pass J and K into the process above, or is it enough if I pass only clk, since it should be enough if the new output gets produced at rising edge of the clock pulse.

You only need to pass clk in.